Everything you need to repair and recolor your damaged leather/vinyl sofa, chair, footrest, vehicle interior and more!
1-8oz Container of Repair Compound
1-32oz of Finish All-In-One Paint
1-Spreader to apply Repair Compound
1-Chip Brush (to get in crevices)
1- Pair of gloves
1- Sanding block
1- 3" Foam Roller, 2pk (to apply paint)
1-16oz Deglosser (to prepare vinyl for repair/recoloring)
REPAIR COMPOUND WORKS ON:
* Tears & Holes
#1 Prep the surface with the Deglosser to thoroughly remove all surface oils.
#2-basic application of Repair Compound put on a smooth layer to fill gaps. Use your gloved fingers dipped in water to smooth out the Repair Compound as much as possible.
#3 Allow Repair Compound to dry for 24 hours.
#4 Sand smooth if necessary with a medium grit sanding block.
#5-Paint with Finish All-In-One Paint. Repeat steps 2-5 if necessary to achieve desired coverage and results. For best results, we suggest painting your entire piece.
Tips: Do not apply in freezing or extremely hot temperatures. Best application is in temperatures of 65-85 deg F.
Open Time/Able to reposition: 15 mins Dry Time: 24 hours Full Cure Time: 14 days
Handling-Protect surrounding area and clothes from spills and splatters. Protect your hands with gloves.
Clean up-Clean with soap & water. Do not allow product to dry on tools.
Storage-Keep lid on at all times when not in use. Store at room temperature between 65-85 degrees for best shelf life. Protect from freezing temperatures. Bond-N-Flex is a one-time use product. Cannot be stored once opened.
Please note, you are DIY repairing an an already damaged surface. Results cannot be guaranteed. Peeling bonded leather should be thoroughly removed prior to repair/painting.